
Penguen Series
PENGUEN Serial Waterproofing Membranes are plastomeric type that are the ideal preference for mild climate zone. In producing this type of membranes, APP (Atactic Polypropylene) with thermoplastic resin is used for to enhance of the bitum. Also incerasing, physical strength of the membranes being used glassfiber tissue and nonwoven polyester mat as a bearing and reinforcement system.
Section

Roll

Properties
It protects its good adherence specialty after the application and it is certain solution for all waterproofing issues especially in the basement applications. It can be applied all different surfaces like wood, cement and metals.
It has shown the property of enhanced elasticity against the transversal and longitudinal structural movement. It also stands against the building movements and structural expansion differencies.
PENGUEN Serial Waterproofing Membranes neither dissolve or discharge in warm weather condition not cracked in the cold weather conditions and can be easily used with the help of blow torch. It is easily applied with cutting special cutters according to necessary sizes.
It is suitable for using in dilatation, concrete structures, parapet turns and chimneys. They are durable same as building life is if they are applied correct way.
Product Name.
|
SP 3000 AF
|
SP 4000 AF
|
Properties
|
Units
|
Test Metho ds
|
|
|
Reinforcement (Carrier)
|
|
|
Polyester 180gr/m2
|
Polyester 180gr/m2
|
Thickness
|
mm
|
EN 1849-1
|
3
|
4
|
Weight
|
kg/m²
|
--------
--
|
3,7
|
4,7
|
Roll Width
|
m
|
EN 1848-1
|
1
|
1
|
Roll Length
|
|
EN 1848-1
|
10
|
10
|
Visible Defects
|
-----
|
EN 1850-1
|
None
|
None
|
Heat Endurance (at least)
|
ºC
|
EN 1110
|
110
|
110
|
Cold Flexibility
|
ºC
|
EN 1109
|
-5
|
-5
|
Breaking at cold frass
|
|
EN 1109
|
-15
|
-15
|
Water impermeability
|
-
|
EN 1928
|
√
|
√
|
Tensile Strength Longitudinal (at least)
|
N/5cm
|
EN 12311-1
|
600
|
600
|
Tensile Strength Transverse (at least)
|
N/5cm
|
EN 12311-1
|
400
|
400
|
Longitudinal Elongation
|
%
|
EN 12311-1
|
30
|
30
|
Transverse Elongation
|
%
|
EN 12311-1
|
30
|
30
|
Impact resistance Method A
|
mm
|
EN 12691
|
1500
|
1500
|
Flexibility test at low temperature ≥0ºC
|
|
EN 1109
|
no cracking
|
no crackcing
|
Sliding resistance of joints
|
%
|
EN 12316-
1
|
1 ≥50 N/5 cm ≥ 175
%
|
1 ≥50 N/5 cm ≥ 175 %
|
Sliding elongation of joints
|
%
|
EN 12317-
1
|
≥300 n/5 cm ≥ 35 %
|
≥400 n/5 cm ≥ 35 %
|
Testing resistance to static loading(metod
A) ≥ 5 kg
|
|
EN 12730
|
no puncture
|
no puncture
|
Tear Resistance Longitudanal
|
N/5cm
|
EN 12310-1
|
150
|
150
|
Tear Resistance Transverse
|
N/5cm
|
EN 12310-1
|
150
|
150
|
Puncture Resistance Static Loading Method A
|
Kg
|
|
≥ 10 Kg
|
≥ 10 Kg
|
Puncture Resistance Static Loading Method B
|
Kg
|
|
≥ 15 Kg
|
≥ 15 Kg
|
Upper surface
|
|
|
Aluminium Foil
|
Aluminium Foil
|
Lower surface
|
|
|
P E
|
P E
|
Application Areas
PENGUEN Serial Waterproofing Membranes can be applied in all the areas where water can affect the structure like the walls which have contact with ground, foundations and layers with the ground.
They can also be used in external walls which is below of the water level , balconies, terraces, bathrooms and toilets.
Additionally PENGUEN Serial Waterproofing Membranes can be used in the structures for water reservoirs, artificial ponds or resting walls. It provides, in many details ovides better economical and aesthetic solutions.
Storage and Protection

Storage and Protection
The rolls of PENGUEN Serial Waterproofing Membranes should be stored in vertical manner. Additionally during the transportation they should be placed vertically.
PENGUEN Serial Waterproofing Membranes should not placed in overlapping manner preventing the hevay load on the rolls.
Membranes should be protected from freezing and sunlight (ultraviolet light).
They should be kept away from heating sources. They must be protected from sudden temperature changes.